Norstar Version - IP Office Info

3.5.5.1 ARS Selectors
This menu cannot be accessed from the System 41 page.
This menu is accessed from the Admin Tasks 42 list by selecting Trunks | Outbound Call Handling | ARS Selectors.
Items marked with a
icon can be programmed from a phone extension.
ARS selectors are used to create groups of available lines. These can then be specified as the groups of line to be used for
different types of external calls in the Dial Numbers Table 102 . An available trunk in an ARS selector group can seized by
dialing 8 followed by the ARS selector group number or using a line appearance 67 button configured for the ARS selector
group number.
· ARS Selector Table
This table is used to edit and add ARS selectors. A selector number can be dialed to seize a matching line by
dialing 8XX where XX is the selector number required. Selector numbers can also be assigned to line appearances
67 to make outgoing calls.
· Selector
This must be a number in the range 65 to 99. Selectors 65, 66 and 67 are used by default entries.
· 65: Group of Lines
This entry cannot be deleted. By default it contains all analog lines in the system, however it can be edited
to change the lines included.
· 66: ISDN Standard Call - Local Number = Default
This entry cannot be deleted. Calls routed to this entry will use an available ISDN line with the calling party
information set to match the user's User CLI if set or otherwise blank (to be set by the provider).
· 67: ISDN Number Withheld - Local Number = Withheld
This entry cannot be deleted. Calls routed to this entry will use an available ISDN line with the calling party
information set to withheld.
· Type
The ARS Selector group can be used for the following functions:
Norstar Version 7.0 Manager Page 100
IP Office Essential Edition
- Issue 03a (21 February 2011)