Norstar Version - IP Office Info

3.3.1.3 Line Assignment
Configuration Settings: User Setup
This menu enables you customize lines by setting the programmable button as a line appearance button to make and
answer calls on a particular line.
For systems operating in PBX System 48 mode, buttons can also be selected for ARS selector group 100 numbers. Those
can be used to make calls but not to receive calls. When pressed, an available line in the ARS selector group is seized.
· Note that for systems running in Key System 48 mode, a number of each users programmable buttons are
automatically configured as line appearance button according to the system Number of Lines 47 setting. If
the system setting Number of Lines 47 is changed, it may overwrite all or some of the current button
programming.
· Lines
Select the line with which the button will be associated. For systems operating in Key System 48 mode, the ARS
Selector group numbers are also listed.
· Ringing Options
Select whether the phone should provide audible alerting when a call is waiting to be answered on the line. Not
used for buttons assigned to ARS Selectors.
· Immediate
Provide audible alerting as normal.
· Delayed Ring
Only provide audible alerting after three rings (15 seconds).
· No Ring
Do not provide any audible alerting.
· Blank
When selected, this option removes all programming from the button.
Norstar Version 7.0 Manager Page 67
IP Office Essential Edition
- Issue 03a (21 February 2011)