Norstar Version - IP Office Info
Norstar Version - IP Office Info
Norstar Version - IP Office Info
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuration Settings: Trunks<br />
· Group of Lines<br />
This type of selector is used to create a group of lines. The lines are selected using the Select Lines table<br />
below. For a call routed to this selector, an available line from that group is used.<br />
· ISDN Local Number<br />
This type of selector is used to set an outgoing local number on an ISDN call. For a call routed to this ARS<br />
selector, an available ISDN channel is used with the calling party element of the Q.931 setup set to match<br />
the local number specified.<br />
· Changing the calling party number may not be supported by the line provider or may be an additional<br />
chargeable service. It will also be subject to restrictions on what numbers can be used. It is normally<br />
a requirement that the calling party number used must be a valid number for return calls to the same<br />
trunk. Use of an invalid number may cause the call to be dropped or the number to be replaced by a<br />
default value.<br />
· The default ARS Selector entry 66 is set to Local number=default. It uses the user's User CLI if<br />
set.<br />
· ISDN Standard Call<br />
This type of selector is used to select an available ISDN channel for the call.<br />
· ISDN Number Withheld<br />
This type of selector is used to withhold any outgoing local number information on an ISDN call. For a call<br />
routed to this ARS selector, an available ISDN channel is used with the calling party element of the Q.931<br />
setup set to withheld.<br />
· S<strong>IP</strong> Call-by-Call<br />
These entries appear when entries are created in a S<strong>IP</strong> trunk's Call-by-Call 91 table. They cannot be<br />
edited through the ARS Selectors form. By having an associated ARS Selector number, the entry can be<br />
selected as the destination for specific out going calls.<br />
· Details<br />
This field show either the lines currently selected for use with the ARS selector or the local number setting for<br />
the calling party number.<br />
· Select Lines<br />
This table is used to add or remove lines from the currently selected ARS selector if its Type is set to Group of<br />
Lines.<br />
<strong>Norstar</strong> <strong>Version</strong> 7.0 Manager Page 101<br />
<strong>IP</strong> <strong>Office</strong> Essential Edition<br />
- Issue 03a (21 February 2011)
Change language