Norstar Version - IP Office Info

· To access this function without a programmable button:
Button Programming: Contact Closure 1
· On DS phones, press FEATURE and dial 41.
· On BST phones, press FEATURE and dial 9*41.
4.17 Contact Closure 2
A button set to this function allows the user to operate the system's contact closure 2 connection. The user must be a
member of the contact closure group.
· If an extension already has a button set to this function, creating another button with this function will
automatically clear the setting from the existing button.
· To access this function without a programmable button:
· On DS phones, press FEATURE and dial 42.
· On BST phones, press FEATURE and dial 9*42.
4.18 Do Not Disturb
Use this feature to be able to press a programmed button to prevent incoming calls for the extension from ringing (LEDs/
LCD still flash). When Do Not Disturb is on, external callers hear ringing while internal callers hear a busy signal. You
should use Do Not Disturb only if someone answers external calls for your extension when you do not answer them.
You can configure do not disturb exceptions. These are numbers that are still able to call even when do not disturb is on.
[OBJECT]
· This function is only supported on a button that includes LED/LCD indicator. The indicator is lit when the function is
enabled.
· If the user has this feature enabled, removing this button with turn the feature off.
· To access this function without a programmable button, press FEATURE and then dial 01.
· Do not disturb overrides call forwarding.
· To access this function without a programmable button:
· On DS and ETR phones, press FEATURE and dial 01.
· On BST phones, press FEATURE and dial 85 (on) or #85 (off).
4.19 Hot Dial
[Object]
· This option is not used by DS and BST phones. Those phone have hot dialing always switched on.
· If an extension already has a button set to this function, creating another button with this function will
automatically clear the setting from the existing button.
· This function is only supported on a button that includes LED/LCD indicator. The indicator is lit when the function is
enabled.
· To access this function without a programmable button, press FEATURE and then dial 26.
4.20 Hunt Group
A button set to this function allows the user to call or page the hunt group represented by the button.
· If an extension already has a button set to this function and target, creating another button with this function to the
same target will automatically clear the setting from the existing button.
· To access this function without a programmable button, press an intercom or call appearance button and then dial
77 and the hunt group number (1 to 6). The additional number 777 can be used for access to voicemail to collect
messages.
· A page call that is auto-answered by the first available extension in the hunt group can be selected by adding a * in
front of the hunt group number.
· This type of button can be used for one touch transfer 21 operation.
Norstar Version 7.0 Manager Page 127
IP Office Essential Edition
- Issue 03a (21 February 2011)