Process Unit 73 LF - Knick

Concentration Determination (only with Option 382)
RPCRMM
WPCRMM0
WPCRMM1
RPCRMA
WPCRMA3
WPCRMA4
WPCRMA5
RPCRM3
WPCRM30
WPCRM31
RPCRM4
WPCRM40
WPCRM41
Query marker
Set marker ”Off”
Set marker ”On”
Query settings of process solution
Set process solution HCl
Set process solution NaOH
Set process solution NaCl
Query settings concentration range HCl
Set concentration range 00–18 % by wt
Set concentration range 22–39 % by wt
Query settings concentration range NaOH
Set concentration range 00–14 % by wt
Set concentration range 18–50 % by wt
(There is only one concentration range for NaCl. Therefore, interface commands are not required.)
Alarm Settings
RPALM
WPALM0
WPALM1
Query marker
Set marker ”Off”
Set marker ”On”
NAMUR Contacts
RPCNM
WPCNM0
WPCNM1
RPCNUO
WPCNUO0
WPCNUO1
RPCNUOTF
WPCNUOTFp
RPCNUOTW
WPCNUOTWp
Query marker settings
Set marker ”Off”
Set marker ”On”
Query normally open/normally closed contacts
Set normally closed contacts
Set normally open contacts
Query failure delay
Set failure delay p
Query warning delay
Set warning delay p
Interface Commands 12–19