Process Unit 73 LF - Knick

The information text shows the contact assignment:
Contact 2 operates in the controller output range
of 0 to –100 %.
Contact 1 operates in the controller output range
of 0 to +100 %.
Type A: Pulse Length Controller
Select the controlled variable using and .
Enter the setpoint, neutral zone and minimum ON
time using scrolling and cursor keys (see page
2–5) and confirm your entries with .
Enter beginning of control, corner X, corner Y,
reset time and period for the left control range
(: controlled variable < setpoint).
Enter end of control, corner X, corner Y, reset time
and period for the right control range (: controlled
variable > setpoint).
Type B: Pulse Frequency Controller
Select the controlled variable using and .
Enter the setpoint, neutral zone and minimum ON
time using scrolling and cursor keys (see page
2–5) and confirm your entries with .
Enter beginning of control, corner X, corner Y,
reset time and period for the left control range
(: controlled variable < setpoint).
Enter end of control, corner X, corner Y, reset time
and period for the right control range (: controlled
variable > setpoint).
Capabilities 9–37