Process Unit 73 LF - Knick

Process Unit 73 LF
When the cursor is on the first digit, increases
the input range by one decade.
Input range changes to 00.00 – 99.99 mS/cm.
The sequence ”104” remains on the display,
shifted by one decimal position. The last digit (”7”)
is erased.
When the cursor is on the last digit, decreases
the input range by one decade.
Input range changes to 000.0 – 999.9 S/cm.
The sequence ”047” remains on the display,
shifted by one decimal position. The first digit (”1”)
is erased.
The digits that are shifted out of the display are
erased (set to zero). That is, only the displayed
4-digit value is edited.
Pressing restores the old value if you have
not yet pressed .
Press the scrolling keys or to scroll
from 0 through 9 and change the sign.
How to change a sign
If the entry value has a sign, the flashing cursor
can be placed on it using .
Pressing or switches between ”+” and
”–”.
An Example
In this example we want to change the temperature
alarm ”Warning Limit Hi” from 50 to 67 C.
Press twice until the flashing cursor is on digit
”5”.
Press once (”6”).
Press once: The flashing cursor is on digit ”0”.
Press three times (”7”).
2–6 Operation