Process Unit 73 LF - Knick

Process Unit 73 LF
Display
Display options
Output 1*)
Output 2*)
Beginning/End of scale*)
Spans
Accuracy
Current source function
Power output
Switching contacts *)
Contact rating
NAMUR contacts 2)
Limit/controller contacts
(Digital controller option 353)
Cleaning contacts
(Option 352)
Graphic LCD, 240 x 64 pixels with CFL 1) backlighting
Main display
character height approx. 20 mm
Secondary display character height approx. 6 mm
Dialog display
7 lines, character height approx. 4 mm
Main display
Secondary display
conductivity conductivity [S/cm]
resistivity resistivity [cm]
concentration concentration [% by wt.]
temperature temperature [C]
time time [h,min]
date
[d,m,y]
current output 1 [mA]
current output 2 [mA]
current input [%]
controller output [%]
controller setpoint
man. temperature [°C]
0 to 20 mA or 4 to 20 mA, max. 10 V, floating
user-defined for conductivity, concentration, resistivity, C
current characteristic user-defined: linear, bilinear, trilinear,
function
error message if load is exceeded
0 to 20 mA or 4 to 20 mA, max. 10 V, floating
user-defined for conductivity, concentration, resistivity, C
optionally as analog controller output (option 483)
current characteristic user-defined: linear, bilinear, trilinear,
function
error message if load is exceeded
Anywhere within measurement range
Conductivity
≥ 0.20 S/cm, at least 20 % full scale
Resistivity
100 ⋅cm, at least 20 % full scale
Concentration 1.00 to 200.0 %
Temperature
10.0 to 300.0 C
< 0.25 % of meas. value + 20 A
0.00 mA to 20.50 mA
24 Vdc / 30 mA, floating, short-circuit-proof
typical applications: loop current for universal input,
signal current for switching outputs
8 switching contacts, floating,
overvoltage category II up to 250 V
ac < 250 V/5 A < 1,250 VA resistive
dc < 120 V/5 A