MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
System Menu<br />
Preferences<br />
Instant Chase on add machine to group<br />
This causes machines to immediately position themselves to the Group Master position when added to a group.<br />
MCS Presets<br />
Pre Roll Time<br />
This is a timecode value that sets the amount of extra timecode that a tape is re-wound by when executing a<br />
Locate or Cycle.<br />
Post Roll Time<br />
This is a timecode value that sets the amount of extra time that a tape will continue for at the end of a Cycle<br />
before rewinding to go back to the Cycle Start time.<br />
Rewind Limit<br />
This is the lowest timecode (or foot-frame) position that machines will go to when rewinding before they stop<br />
automatically.<br />
Fast Forward Limit<br />
This is the highest timecode (or foot-frame) position that machines will go to when fast-forwarding before they<br />
stop automatically. This is useful when using reel-to-reel tape machines to prevent the machine from<br />
over-running the end of the tape.<br />
Roll Back Time<br />
This is a timecode value that sets the amount of re-wind when a Roll Back command is sent to the transport<br />
device(s).<br />
Issue 4 Page 18:13