MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Fader Assignment<br />
Fader Calibration<br />
Fader Calibration<br />
The faders are calibrated when the console is started up, either from a cold start or a re-boot.<br />
A fader calibration can be performed manually in an attempt to cure any fader problems on the console<br />
surface.<br />
To calibrate the faders press and hold the Page Up key on the system master keyboard.<br />
NEW<br />
LABEL<br />
HELP<br />
1<br />
INS<br />
2 3<br />
DEL<br />
4 5<br />
6<br />
TIME<br />
GRAB<br />
TIME<br />
END<br />
CANCEL<br />
7 8 9<br />
FROM<br />
TO<br />
UNDO<br />
FILING<br />
I/O<br />
MAN<br />
-<br />
0<br />
+<br />
ENTER<br />
EQ/<br />
DYN<br />
PATH<br />
EDITOR<br />
DESK<br />
EDITOR<br />
ENCORE<br />
.<br />
ROLL<br />
BACK<br />
LOC<br />
CYCLE<br />
JOG<br />
SHUTTLE<br />
REC<br />
Press the CAL key on the control room panel, then release both keys.<br />
SMALL<br />
L/S 2<br />
SMALL<br />
L/S 1<br />
SOLO<br />
CLEAR<br />
MONO<br />
M/S<br />
DIM<br />
PHASE<br />
LEFT<br />
CUT<br />
LEFT<br />
CAL<br />
PHASE<br />
RIGHT<br />
CUT<br />
RIGHT<br />
-3<br />
-6<br />
USER<br />
CUT<br />
LARGE LS<br />
CONTROL MAIN<br />
ROOM<br />
The faders will be re-calibrated. Audio is not affected by fader calibration (i.e. the console is not muted).<br />
Issue 4 Page 5:2
Change language