MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Working With Signal Paths<br />
Processing<br />
Processing<br />
Process On / Off keys turn the process (if present) on or off, without having to have the process currently<br />
assigned to the strip. This is useful for auditioning processing.<br />
The Process keys will call the process to the path (the internal LED will be lit green if the process is present).<br />
EQ<br />
COMP<br />
LIM<br />
AUX<br />
1-8<br />
ON<br />
MODE<br />
FLTR<br />
SCF/KEY<br />
GATE<br />
EXP<br />
AUX<br />
9-16<br />
ON/<br />
CLEAR<br />
I/O<br />
&PAN<br />
INS<br />
GAIN<br />
BAL<br />
PAGE<br />
2<br />
Pressing the EQ key will show the Frequency and Level for the first 4 bands. Press the PAGE 2 key to show Q and<br />
Shape. If there are more than 4 bands present, then bands 5-8 are selected using the FLTR / SCF / KEY key.<br />
The FLTR SCF/KEY key shows Filter parameters, and Sidechain Filter or Key Input controls on pressing the PAGE<br />
2 key.<br />
Each press of the I/O & PAN key will toggle through available Inputs / Outputs. The first page shows current<br />
port input (or output), trim, phase & delay. Press PAGE 2 to show port, trim and phase, plus the four pan<br />
controls. If there is more than one output assigned to a path, the key becomes a three-state toggle. If ABW has<br />
been assigned, this is also shown on this page.<br />
Pressing the COMP/LIM key will show compressor controls. Limiter controls are selected with the PAGE 2 key.<br />
Pressing the GATE/EXP key will show gate controls. Expander controls are selected with the PAGE 2 key.<br />
Pressing the INS key will show insert ports plus trim and delay. It is possible to add trim and/or delay to both the<br />
input and output ports. The PAGE 2 key only has a function if there is a second insert.<br />
The Aux 1-8 key is used to show levels and on/off for auxes 1-4. Press the GAIN/BAL key to access Pre/Post and<br />
Pan (if stereo). Press the PAGE 2 key (and GAIN/BAL) to show controls for Auxes 5-8.<br />
The Aux 9-16 key is used to show levels and on/off for auxes 9-12. Press the GAIN/BAL key to display Pre/Post<br />
and Pan (if stereo). Press the PAGE 2 key (and GAIN/BAL) to show controls for Auxes 13-16.<br />
Pressing the ON/CLEAR key turns on or off the currently displayed process. The internal LED will be green if the<br />
process is present, red if it is switched on.<br />
The alpha window shows the currently selected process. As a logicator is touched, this display will change to<br />
show which control is active. The value of that control will be shown in the alpha window adjacent to the<br />
logicator itself.<br />
Issue 4 Page 4:6