MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
MMC User Manual - AMS Neve
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tools Menu<br />
Snapshot Scope<br />
The LED above the RECALL SNAP key will flash.<br />
To limit the data restored by the Snapshot click the Include check boxes for items not required in the<br />
Snapshot System dialogue box.<br />
The check boxes are:<br />
Ports<br />
Routing<br />
I/O<br />
Auxes<br />
Dynamics<br />
EQ<br />
Fader<br />
Mic/Line<br />
The port routing for paths (.e. which input and/or<br />
output a path is digitally patched to)<br />
The internal routing between paths (e.g. Channels<br />
to Tracks).<br />
The settings of controls on inputs and outputs (e.g.<br />
input trim).<br />
Auxiliary contribution levels.<br />
Settings of the Dynamics controls.<br />
Settings of the Equaliser controls.<br />
The Fader level.<br />
Changes to mic.<br />
These override the Scope set on the console surface. For instance, to restore the routing, un-check all the boxes<br />
except the Ports and Routing boxes. Leave the console surface Scope at default (the whole console) and recall<br />
the Snapshot.<br />
The checked boxes are remembered upon each entry and exit to the snapshot screen.<br />
To recall Snapshots double-click on the required Snapshot in the list in the Snapshot System dialogue box.<br />
The Snapshot will be recalled according to the Scope and Include check boxes.<br />
Or<br />
Select the required Snapshot number with the + and – keys on the keyboard.<br />
Issue 4 Page 24:44
Change language