MMC User Manual - AMS Neve

More documents

Recommendations

Info

Routing Path Routing with the Access Keys Press the keys for the required sources at the bottom of the screen or the numbered GROUP keys then release the destination key. The Auxiliaries can only be selected as destinations, not as sources. To route multiple sources to Groups, Main Outputs or Auxiliaries press and hold the required number key in the GROUP, AUX or MAIN OUTPUTS area. Existing sources will be indicated by the screen, source key LEDs and ACCESS Key LEDs. Press the keys for the required sources then release the destination key. To access additional Tracks (if available) press the left/right arrow keys above the screen. The red hashing will move to the next/previous row of Track numbers. Path Routing with the Access Keys The ACCESS Keys on the Fader Strips, can be used for routing, either by using other ACCESS Keys or any of the routing controls associated with the Routing Screen. When an ACCESS Key is used for routing a Track then it can only be used as a routing source. To route a path to destinations press and hold the ACCESS Key or main output for a Channel or Track Group then press the keys for valid destinations on the routing screen or other Access Keys. Existing routing of the path will be indicated by the illumination of LEDs above ACCESS keys and integral LEDs in the keys around the Routing Screen illuminating red. The integral LEDs in the keys for the selected destinations will illuminate red and the Routing Screen will show routing changes. Clearing Routing Clearing routing (or de-routing) can be achieved by the same actions as doing the routing (to toggle the particular routing selection off again). This will de-route paths one at a time. Alternatively, multiple paths can be de-routed in one operation by using the Clear Routing dialogue box. To clear routing press the left and right arrow keys above the routing screen at the same time or right click on the routing screen. Click the Clear Routing option. In both cases, the Clear Routing dialogue box will be displayed. Click in the required Source and Destination check boxes and click OK. The selected routing will be cleared (de-routed) and the routing screen will be updated as applicable. Clear Routing does not affect monitoring selections made via the SELECT Panel. Issue 4 Page 7:6
Routing Path Routing with the Access Keys Routing Screen Display Options To change the background colour of the routing screen double click anywhere on the background. A Colour dialogue box will be displayed. Click on the required colour then click OK. The background colour will be changed as selected. Other Routing Screen Options Move the trackball pointer across to the routing display and right click. The pop-up routing menu will appear next to the trackball pointer. Issue 4 Page 7:7
Page 1 and 2: Logic MMC User Manual 527-328 Issue
Page 3 and 4: Logic MMC User Manual Contents 8 Mo
Page 5 and 6: Logic MMC User Manual Contents 19 A
Page 7 and 8: Glossary of Terms Glossary of Terms
Page 9 and 10: Glossary of Terms Path Mono This is
Page 11 and 12: Introduction Structure of this Manu
Page 13 and 14: The Logic MMC Console Console Surfa
Page 15 and 16: The Logic MMC Console Fader Strip F
Page 17 and 18: The Logic MMC Console Master Sectio
Page 19 and 20: The Logic MMC Console Master Sectio
Page 21 and 22: The Logic MMC Console Optional Surr
Page 23 and 24: The Logic MMC Console Optional Mete
Page 25 and 26: Working With Signal Paths Main Outp
Page 27 and 28: Working With Signal Paths Externals
Page 29 and 30: Working With Signal Paths Processin
Page 31 and 32: Fader Assignment Fader Calibration
Page 33 and 34: Routing I/O Routing Routing I/O Rou
Page 35 and 36: 20 40 60 80 100 20 40 60 80 100 Rou
Page 37: Routing Path Routing with the Routi
Page 41 and 42: Monitoring Control Room Monitoring
Page 43 and 44: Monitoring Studio Loudspeakers Stud
Page 45 and 46: Surround Sound Panel How the Surrou
Page 47 and 48: Surround Sound Panel Surround Stem
Page 49 and 50: Surround Sound Panel Surround Monit
Page 55 and 56: Surround Sound Panel Stem and Recor
Page 57 and 58: Joystick Module Using the Joystick
Page 59 and 60: Metering VU Meters Metering The Rou
Page 61 and 62: Metering Meter Bridge Press the ke
Page 63 and 64: Talkback Talkback Controls Talkback
Page 65 and 66: Ganging Linking Controls Both the m
Page 67 and 68: Machine Control Shuttle and Jog Pr
Page 69 and 70: Machine Control Cycle To select a
Page 71 and 72: Machine Control Post Roll Post Roll
Page 73 and 74: Automation Controls that can be Aut
Page 75 and 76: Automation Automation Scope Automat
Page 77 and 78: Automation Mix/Pass Trees For insta
Page 79 and 80: Automation Setting Automation Modes
Page 81 and 82: Automation Making a Mix/Pass Switch
Page 83 and 84: Automation Collect Touch This can b
Page 85 and 86: Using Encore The Main Encore Screen
Page 87 and 88: Using Encore Keyboard Shortcuts Key
Page 89 and 90:
System Menu Automation Mode System
Page 91 and 92:
System Menu Filing Automation Mix T
Page 93 and 94:
System Menu Filing This has two opt
Page 95 and 96:
System Menu Preferences Preferences
Page 97 and 98:
System Menu Preferences Pan and Ope
Page 99 and 100:
System Menu Preferences PFL Interlo
Page 101 and 102:
System Menu Preferences Instant Cha
Page 103 and 104:
System Menu Studio Information Cont
Page 105 and 106:
Automation Menu Copy Path Data To
Page 107 and 108:
Automation Menu Merge Path Data Mer
Page 109 and 110:
Automation Menu Show Mix Statistics
Page 111 and 112:
Automation Menu Show Mix/Pass Tree
Page 113 and 114:
Options Menu Timecode Options Timec
Page 115 and 116:
Options Menu Self Closing Dialogs S
Page 117 and 118:
Transport Menu Group Setup Configur
Page 119 and 120:
Transport Menu Group Setup Lock cor
Page 121 and 122:
Transport Menu Show MCS Machine Sta
Page 123 and 124:
Lists Menu Label List Lists Menu La
Page 125 and 126:
Lists Menu Fader Moves List Path is
Page 127 and 128:
Tools Menu Desk Edit Tools Menu Des
Page 129 and 130:
Tools Menu Desk Edit exceed 100%, a
Page 131 and 132:
Tools Menu Desk Edit Pan Designator
Page 133 and 134:
Tools Menu Desk Edit Click and hol
Page 135 and 136:
Tools Menu Desk Edit When this is c
Page 137 and 138:
Tools Menu Path Edit Inhibit Automa
Page 139 and 140:
Tools Menu Path Edit A dynamics ele
Page 141 and 142:
Tools Menu I/O Patching The Port na
Page 143 and 144:
Tools Menu I/O Config To start a ne
Page 145 and 146:
Tools Menu I/O Config A box will ap
Page 147 and 148:
Tools Menu I/O Config Input ports w
Page 149 and 150:
Tools Menu I/O Config activated by
Page 151 and 152:
Tools Menu I/O Config SNAPSHOT VALI
Page 153 and 154:
Tools Menu AES Config AES Config On
Page 155 and 156:
Tools Menu AES Config Frequency 44.
Page 157 and 158:
Tools Menu Machine Manager Machine
Page 159 and 160:
Tools Menu EDL Editor EDL Editor O
Page 161 and 162:
Tools Menu Defaults Manager Touch
Page 163 and 164:
Tools Menu Backup Manager Backup Ma
Page 165 and 166:
Tools Menu Floating Timecode Floati
Page 167 and 168:
Tools Menu Automotion Click on the
Page 169 and 170:
Tools Menu Snapshot Scope SHIFT COP
Page 171 and 172:
Tools Menu Snapshot Scope Press th
Page 173 and 174:
Appendix A : User Administration Us
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Appendix B: Ghost Recovery and Main
show all

MMC User Manual - AMS Neve

Create successful ePaper yourself

Delete template?

Save as template?