REFERENCE MANUAL - FTP Directory Listing - Trimble

FIRMWARE UPGRADE 11
Packet ID – 0x8C (Restart Target)
This packet returns the target from the monitor to the normal operating mode. As at
startup, the target will initialize all system resources and perform all system tests. The
target returns ACK to acknowledge the received packet before the execution.
This packet is designed to bring the receiver from the monitor mode to the normal
mode after a firmware update.
Note – This packet also clears all BBRAM sections to guarantee a cold start after a
firmware update.
Table 11.10
Restart Target
BYTE 0 BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5
0x02 0x00 0x8C 0x00 0x8C 0x03
Copernicus GPS Receiver 115