ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 3 Function of the Builder
Creating a new cluster
108
Create a new cluster using the Builder.
Important:
If you create a new cluster, the cluster configuration data that has been edited will be discarded.
Be sure to save the required data before you create a new cluster.
1. On the menu bar, click File and then click Create New File.
2. If you made changes in the cluster configuration data, a dialog box asks if you want to save
them before they are discarded. Click Yes to save the changes. A dialog where you can
specify a folder to save the cluster configuration data is displayed. If you do not want to
save the changes, click No. For how to save the data, see “Saving the configuration file” on
page 109.
3. On the left pane of the screen on the tree view displayed, right-click the cluster icon and
click Cluster Generation Wizard. Use the Cluster Generation Wizard to create a cluster.
For the Cluster Generation Wizard,, refer to Chapter 5, “Creating the cluster configuration
data” in the Installation and Configuration Guide.
Opening the configuration file
Select Open to open the saved cluster configuration data. A tree view is displayed by the
configuration file that has been read.
Select this to restart editing a temporary file saved while editing the configuration data.
How to use:
1. Click Open from the File menu.
2. The Open dialog is displayed. Select an appropriate configuration file and click Open. The
data of the configuration file is displayed in the Builder.
For File Name, select or type “clp.conf.”
ExpressCluster X 2.0 for Windows Reference Guide