ExpressCluster X 2.0 for Windows Reference Guide - Nec

Section I Detailed functions of ExpressCluster
Setting limitations on the connection and operation of the WebManager
Switch authorization of the WebManager
The chart below describes the flow of accessing the WebManager and switching authorization.
Login at startup
Login screen (Authorization)
Operation Mode screen Reference Only screen
3
Login screen (Authorization)
1. Login to the WebManager
The log on authorization dialog box is displayed when a password for operation mode or
reference only is set. You can log on to the WebManager by selecting the authorization of
either Operation Mode or Reference Only and entering the correct password.
2. Switch the authorization from the reference only screen to the operation mode screen
The dialog box for password authorization is displayed. You can log on by entering the
correct password. When password limitation is not configured, log on without entering a
password.
3. Switch the authorization from the operation screen to the reference only screen
1
4 4
Authorization can be switched without authentication. You can do so even when the
password limitation is configured.
4. Login when a password for both operation mode and reference only is not set
Log in by following the client IP limitation. If the client IP limitation is not configured, log
on to the WebManager whose authorization is in the operation mode. In this case, you
cannot switch the authorization to reference only.
2
75