ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 13 Error messages
IMAP4 monitor resource
Module
Type
840
Type
imap4w Error 1
imap4w Error 2
imap4w Error 10
imap4w Error 11
imap4w Error 12
imap4w Error 13
imap4w Error 15
Return
Value
Message Description Solution
Initialization has
failed[%1!s!].
The configured value is
not correct.
A function error was
detected.
An error was detected in
accessing the monitor
target.
An error was detected in
user authentication.
An application error was
detected.
A data error was
detected.
imap4w Error 40 No license is registered.
imap4w Error 60
Failed to obtain the
configuration data.
Initialization process has
failed. It may be due to
memory allocation
failure.
Information on the
initialization may be
displayed on %1.
The configured value of
the monitoring is not
correct.
A function error
occurred.
The access to the
monitor application
failed.
The access to the
monitor application
failed.
A monitor application
error was detected.
A value of the response
data has an error.
The license has not
been registered.
The configured value
could not be obtained.
OS itself may have
errors. Restart the
server or take other
actions
Check the configured
value on the Builder
since it may not be
correct.
Monitor applications or
OS may have errors.
Check the status of the
system.
Check configured values
on the Builder (such as
an IP address). If there
is no error, check if the
monitor application has
errors.
Check configured values
on the Builder (such as
a user name or a
password). If there is no
error, check if the
monitor application has
errors.
Refer to error messages
for monitor applications
described separately to
fix errors.
Refer to error messages
for monitor applications
described separately to
fix errors.
Register the license.
OS may have errors.
Restart the server or
take other actions.
ExpressCluster X 2.0 for Windows Reference Guide