ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 3 Function of the Builder
Overview of the Builder
96
The ExpressCluster X Builder is a tool for creating and changing the cluster configuration data
(config and/or script) for the ExpressCluster Ver3.0 or later.
Note:
“Host name” in this guide represents the short name that excludes the domain name from a
frequently qualified domain name (FQDN).
The table below describes the icons in “Using the menu bar of the Builder” and “Parameter
details.”
These icons represent the operations required to reflect the changes of items to the cluster. The
table below shows the priorities of required operations in the descending order (high (1) to low
(6)) if you make changes in multiple items.
Icon Priority How to change Refer to
ShutdownReboot 1 Shut down and reboot cluster The Installation and
Configuration Guide
Chapter 8, “Preparing to
operate a cluster system.”
StopRestart 2 Stop and restart the cluster daemon The Installation and
Configuration Guide
Chapter 8, “Preparing to
operate a cluster system.”
SuspendResume 3 Suspend and resume the cluster
daemon
GroupStopRestart 4
The Installation and
Configuration Guide
Chapter 8, “Preparing to
operate a cluster system.”
Stop and resume the group The Installation and
Configuration Guide
Chapter 8, “Preparing to
operate a cluster system.”
MStopRestart 5 Stop and resume the WebManager
Stop and resume the alert log
The Reference Guide
Chapter 1 “Function of the
WebManager”
(No icon) 6 Upload only The Installation and
Configuration Guide
Chapter 8, “Preparing to
operate a cluster system.”
To form a new cluster, refer to the Installation and Configuration Guide.
ExpressCluster X 2.0 for Windows Reference Guide