ExpressCluster X 2.0 for Windows Reference Guide - Nec

Module
Type
Chapter 13 Error messages
806
Event
Type
Event
ID
Messages Description Solution
ExpressCluster X 2.0 for Windows Reference Guide
Alert
Event log
User log
Report Manager
setting Alive
Mail report
rm Information 1516
There was a request to
shut down the system for system shutdown
failure in monitor %1.
There was a request to
- ● ● ●
rm Information 1517 restart the system for
failure in monitor %1.
system reboot - ● ● ●
rm Error
Failed to stop %1 due to
1518 relation stop failure
error detection of %2.
Check the status of resources. ● ● ● ●
rm Error
Failed to restart %1 due
1519 relation restart failure
to error detection of %2.
Check the status of resources. ● ● ● ●
rm Error 1520
Failed to fail over %1
due to error detection
of %2.
relation group failover
failure
Check the status of resources. ● ● ● ●
rm Error 1521
Failed to stop the cluster
due to error detection cluster stop failure
of %1.
The system may not be able to
operate properly.
● ● ● ●
rm Error 1522
Failed to shut down the
system due to error
detection of %1.
os shutdown failure
The system may not be able to
operate properly.
● ● ● ●
rm Error 1523
Failed to restart the
system due to error
detection of %1.
os reboot failure
The system may not be able to
operate properly.
● ● ● ●
rm Error
The group of monitor %1
1524 unknown group
is unknown.
No action is taken
Check the cluster configuration
data.
● ● ● ●
rm Warning 1525 because %1 is not
online.
not perform failure action - ● ● ● ●
rm Information
Status of monitor %1
1526
was returned to normal.
status changed into
normal
- ● ● ●
rm Information 1527
Status of monitor %1
was changed into
unknown.
status changed into
unknown
The system may not be able to
operate properly.
● ● ●
rm Error 1528
Initialization error has
occurred (%1 : %2)
process initialize error
The system may not be able to
operate properly.
● ● ● ●
rm Information
Monitor %1 was
1529
suspended.
suspend (single monitor) - ● ● ●
rm Information
Monitor %1 was
1530
resumed.
resume (single monitor) - ● ● ●
rm Information
All monitors were
1531
suspended.
suspend (all monitors) - ● ● ●
rm Information
All monitors were
1532
resumed.
resume (all monitors) - ● ● ●
rm Information 1533
The polling interval of
monitor %1 was
changed into %2*%3.
change polling interval
(single monitor)
- ● ● ●
rm Information 1534
The polling interval ratio
of all monitors were
changed into %1.
Causing intentional stop
change polling interval
(all monitors)
- ● ● ●
rm Information 1535
error was required
because an error is
detected by %1.
Causing intentional stop
intentional panic - ● ● ●
rm Error 1536
error has failed because
an error is detected
by %1.
intentional panic failure
The system may not be able to
operate properly.
● ● ● ●