ExpressCluster X 2.0 for Windows Reference Guide - Nec

TCP/UDP
Recovery tab
� Client Service Port Number (1 to 65535 3 ) ShutdownReboot
This port number is used for client service.
Section I Detailed functions of ExpressCluster
Parameter details
Initialize
This is used for initializing the value to the default value. Click the Initialize button to initialize
all the items to the default value.
Make settings on cluster recovery.
Reboot Limitation
You can specify the Reboot OS or Shut down OS as the final action at abnormality detection for
group resources and monitor resources. If either of them is selected, reboot may be repeated
infinitely. By setting the reboot limit, you can prevent repeated reboots.
� Max Reboot Count (0 to 99) SuspendResume
Specify how many times the operating system can reboot. The number specified here is
separately counted for group resource and monitor resource.
� Max Reboot Count Reset Time (0 to 999) SuspendResume
When the max reboot count is specified, if the operation keeps running normally for the
time specified here, the reboot count is reset. The time specified here is separately counted
for group resource and monitor resource.
Note:
If Max Reboot Count is set to 1 or greater, set Max Reboot Count Reset Time also to 1 or
greater.
Use Forced Stop
Use this to select whether or not to enable the forced stop.
• On
If selected, the forced stop function is enabled.
127