ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 5 Compatible command reference
Setting or displaying operations at the occurrence
of the emergency shutdown (armem command)
370
armem.exe: the armem.exe command sets or displays the operation mode at the occurrence
of emergency shutdown.
Command line:
armem.exe /M [shutdown | reboot | poweroff]
Description This command sets or displays the operation mode at the occurrence of
the emergency shutdown.
Parameter
Return Value
/M Displays the current operation mode.
/M shutdown This parameter is for compatibility. It functions in the
same way as the poweroff parameter.
/M reboot Reboots the server after shutdown.
/M poweroff Powers off the server after shutdown.
0 Success
7 An error occurred in WIN32API.
9 The parameter is invalid.
Remarks This command can be specified only outside scripts.
The default value of the operation mode immediately after the
installation is “shutdown.”
The operation mode specified by this command is valid until the
ExpressCluster Server is uninstalled.
The operation mode must be set for each server. The setting values are
valid only on the server on which this command was run.
ExpressCluster X 2.0 for Windows Reference Guide