ExpressCluster X 2.0 for Windows Reference Guide - Nec

Return Value
--grp
[group_name]
Section I Detailed functions of ExpressCluster
Displaying the cluster status (clpstat command)
Displays group configuration information. By
specifying the name of a group, you can display only
the information on the specified group.
--svg [svgname] Displays server group configuration information. By
specifying the name of a server group, you can
display only the information on the specified server
group.
--rsc
[resource_name]
--mon
[monitor_name]
Displays group resource configuration information.
By specifying the name of a group resource, you can
display only the information on the specified group
resource.
Displays monitor resource configuration information.
By specifying the name of a monitor resource, you
can display only the information on the specified
monitor resource.
--detail Displays more detailed information on the setting.
-h host_name Acquires information from the server specified with
host_name. Acquires information from the command
running server (local server) when the -h option is
omitted.
0 Success
Other than 0 Failure
Remarks According to the combination of options, configuration information
shows information in various forms.
Note:
Run this command as a user with Administrator privileges. The ExpressCluster service must be
activated on the server where you run this command. When you specify the name of a server for
the –h option, the server should be in the cluster.
Examples of information displayed after running these commands are provided in the next
section.
Error Messages
Message Cause/Solution
Log in as administrator. Log in as a user with Administrator
Invalid configuration file. Create valid
cluster configuration data by using the
Builder.
privileges.
Create valid cluster configuration data
by using the Builder.
Invalid option. Specify a valid option.
Could not connect to the server. Check Check if the ExpressCluster service is
if the cluster service is active
operating.
Invalid server status. Check if the ExpressCluster service is
operating.
Server is not active. Check if the cluster Check if the ExpressCluster service is
service is active.
operating.
Invalid server name. Specify a valid Specify the valid server name in the
server name in the cluster.
cluster.
Invalid heartbeat resource name. Specify the valid heart beat resource
Specify a valid heartbeat resource
name in the cluster.
name in the cluster.
Invalid network partition resource Specify the valid network partition
203