ExpressCluster X 2.0 for Windows Reference Guide - Nec

Section I Detailed functions of ExpressCluster
Parameter details
� Net Mask
Enter a network mask to be registered.
Remove
Use Remove to remove a network address from the Network Address. Select a network address
you want to remove and click Remove.
Edit
Use Edit to edit a network address. Select a network you want to edit from the Network
Address and click Edit. The entry of network address dialog box where a network address is
preset is displayed.
Alert service tab
Configure the alert service, chassis identify, and network warning light.
To use the mail alert function and network warning light, register the license of alert service.
Note:
To use the mail alert function and network warning light, ExpressCluster X Alert Service 2.0 for
Windows is required.
Enable Alert Setting
Configures whether or not to modify the default value of the alert settings. To modify the settings,
click Edit to configure the destination address.
If you clear the checkbox, the destination address you have modified returns to the default
settings temporarily.
For the default settings of the destination address, see the messages reported by eventlog and
alert in the Chapter 13 “Error messages.”
E-mail Address (Within 255 bytes)
143