ExpressCluster X 2.0 for Windows Reference Guide - Nec

Section I Detailed functions of ExpressCluster
Window of the WebManager
Note:
Logs may not be downloaded properly if nothing is changed for more than 10 minutes.
If you are using Internet Explorer 6.0 SP1 or later, the window described above may not be
displayed. If the window is not displayed, enable the setting “Automatic prompting for file
downloads” in the security settings, and collect logs again. Logs may not be downloaded
properly when the window shown above is left without any action for more than 10 minutes.
If other modal dialog is displayed while collecting logs, the file saving dialog for the log
collection will not be displayed. To display the file saving dialog, close the modal dialog.
Updating the WebManager information
Update the information displayed in the WebManager by clicking the Reload button in the title
view in the upper part of the WebManager.
Note:
The information in the WebManager is regularly updated and the latest status is not immediately
displayed even if the status has changed. To display the latest information, click the Reload
button after performing an operation.
To configure the automatic reload interval of the WebManager, from the shortcut menu, select
Properties. In the properties dialog box, click the WebManager tab. Configure the Reload
Interval.
Some objects may be displayed in gray when communications to the connecting destination is
disabled or ExpressCluster is not working at the access destination.
Starting the Builder from the WebManager
Click Start Builder to reboot the Builder in the title view on the upper part of the WebManager
reboots the Builder. For details on the Builder, refer to Chapter 3, “Function of the Builder.”
29