ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 3 Function of the Builder
154
Add SuspendResume
Use Add to add an interface. Click Add to open the IP Address Settings dialog box.
� IP Address
Enter an IP that is actually used for interconnect LAN.
Remove SuspendResume
Use Remove to remove an interface. Select an interface you want to remove from the interface
list and click Remove. You cannot remove the I/F No. specified for the heartbeat interface. To
remove it, change the heartbeat interface settings first.
Edit
Use Edit to edit an IP address. Select an interface you want to edit from the interface list, and
click Edit. The IP Address Settings dialog box where the selected IP address is preset is
displayed.
Note:
Be careful when you change an IP address of the server. For how to change the IP addresses, see
Chapter 10, “The system maintenance information.”
Note:
Do not specify address in IPv6 format for Windows Server 2003 environment.
Up & Down SuspendResume
Use Up and Down to change I/F No. Select an interface from the interface list and click Up or
Down. The selected row moves accordingly.
ExpressCluster X 2.0 for Windows Reference Guide