ExpressCluster X 2.0 for Windows Reference Guide - Nec

Section III Maintenance information
Troubleshooting
Unavailable commands when interconnections are disconnected
Commands for cluster construction
Command Description Remarks
clpcfctrl Distributes the configuration information
created by the Builder to the servers
registered in the configuration information.
Backs up the cluster configuration
information to be used by the Builder.
Commands for showing status
Command Description Remarks
clpstat Displays the cluster status and settings
information.
Commands for cluster operation
Command Description Remarks
clpcl Starts, stops, suspends and resumes the
ExpressCluster Server service.
clpdown Stops the ExpressCluster service and
shuts down a server registered in the
configuration information.
clpstdn Stops the ExpressCluster service in the
entire cluster, and shuts down all servers.
The configuration
information cannot be
distributed to other
servers.
Statuses of other servers
cannot be retrieved.
Other servers cannot be
operated, suspended or
resumed.
Other servers cannot be
operated.
Other servers cannot be
operated.
clpgrp Starts, stops and moves groups. Only groups on the local
server can be stopped.
clptoratio Extends and displays time-out values of all
servers in the cluster.
Time-out ratios of other
servers cannot be set.
Commands for logs
Command Description Remarks
clplogcc Collects logs and OS information. Logs of other servers
cannot be collected.
Commands for mirror (only for the Replicator / Replicator DR)
Command Description Remarks
clpmdstat Displays the status and settings
information of mirroring
clpmdctrl Activates/inactivates mirror disk resources
and recovers mirroring.
clphdsnapshot Controls snapshot backup of hybrid disk
resource.
The mirror status of the
remote server cannot be
retrieved.
Do not use this
command since mirror
disk resources of both
servers may be
activated.
This command cannot be
used unless mirroring is
successfully performed.
779