ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 4 ExpressCluster command reference
320
control by Windows OS power management function.
Error Messages
Message Cause/Solution
Log in as Administrator. Log in as a user with Administrator privileges.
This command is already run. This command has already been run.
Invalid option. This option is invalid. Check the option.
Invalid mode.
Check if --high or --low or -i or -s option is
specified.
Failed to initialize the xml library.
Check if memory or OS resources are sufficient.
Check if either of the --high, --low, -I or -s option is
specified.
Check to see if the memory or OS resource is
sufficient.
Failed to change CPU frequency settings. Check the BIOS settings and the OS settings.
Check if the cluster is started.
Check if the setting is configured so that CPU
frequency control is used.
Failed to acquire CPU frequency settings. Check the BIOS settings and the OS settings.
Check if the cluster is started.
Check if the setting is configured so that CPU
frequency control is used.
Failed to create the mutex. Check if the memory or OS resource is sufficient.
Internal error. Check if memory or OS resources Check if the memory or OS resource is sufficient.
are sufficient.
ExpressCluster X 2.0 for Windows Reference Guide