ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 13 Error messages
Virtual computer name resource
Module
Type
828
Type
vcom Error 5
vcom Error 6
vcom Error 8
vcom Error 9
vcom Error 10
vcom Error 11
vcom Error 12
vcom Error 13
Return
Value
Message Description Solution
VCOM control process
has already been
started.
VCOM control process
has not been started.
VCOM control process
does not exist.
Failed to get IP address
table.
Target FIP address does
not exist.
Virtual computer name
is the same as local
hostname.
Failed to start VCOM
control process.
Failed to stop VCOM
control process.
VCOM control process
has already been
started.
VCOM control process
has not been started.
VCOM control process
does not exist.
Failed to get IP address
table.
Target FIP address does
not exist.
Virtual computer name
is the same as local
hostname.
Failed to start VCOM
control process.
Failed to stop VCOM
control process.
vcom Error Others Internal error occurred. Internal error occurred.
Memory or OS
resources may not be
sufficient. Check them.
Restart the OS.
Memory or OS
resources may not be
sufficient. Check them.
Restart the OS.
Memory or OS
resources may not be
sufficient. Check them.
Restart the OS.
Memory or OS
resources may not be
sufficient. Check them.
Check if the IP address
of the target FIP
resource exists.
Do not set existing host
names for a virtual
computer name.
Check if all conditions
for using a virtual
computer are met.
An error occurred when
stopping the virtual
computer.
Restart the OS.
Memory or OS
resources may not be
sufficient. Check them.
ExpressCluster X 2.0 for Windows Reference Guide