ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 13 Error messages
Module
Type
836
Type
ftpw Error 11
ftpw Error 12
ftpw Error 13
ftpw Error 15
Return
Value
Message Description Solution
An error was detected in
accessing the monitor
target.
An error was detected in
user authentication.
An application error was
detected.
A data error was
detected.
ftpw Error 40 No license is registered.
ftpw Error 60
Failed to obtain the
configuration data.
Custom monitor resource
Module
Type
Type
Return
Value
genw Error 1 Parameter is invalid.
genw Error 2
genw Error 3
The access to the
monitor application
failed.
The user authentication
failed.
A monitor application
error was detected.
A value of the response
data has an error.
The license has not
been registered.
The configured value
could not be obtained.
Message Description Solution
Resource does not exist
in cluster configuration
data.
Failed to get the value
from cluster
configuration data.
genw Error 4 Script path is invalid.
The configured value of
the monitoring is not
correct.
The cluster configuration
data is not correct.
The cluster configuration
data is not correct.
The configured value of
the script path is not
correct.
genw Error 5 Failed to start script. Failed to start script.
genw Error 6 Script did not exist.
genw Error 7 Timeout occurred.
The asynchronous type
script terminated
abnormally.
The synchronous type
script did not terminate
within the time-out
period.
Check configured values
on the Builder (such as
an IP address). If there
is no error, check if the
monitor application has
errors.
Check configured values
on the Builder (such as
a user name or a
password). If there is no
error, check if the
monitor application has
errors
Refer to error messages
for monitor applications
described separately to
fix errors.
Refer to error messages
for monitor applications
described separately to
fix errors.
Register the license.
OS may have errors.
Restart the server or
take other actions
Check the configured
value on the Builder.
Check the cluster
configuration data on the
Builder.
Check the cluster
configuration data on the
Builder.
Check the configured
value on the Builder.
Check if the script can
be executed.
Check the cause of the
termination of the script.
Check the cause of the
delay of the script.
ExpressCluster X 2.0 for Windows Reference Guide