ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 6 Group resource details
418
Final Action SuspendResume
Select an action to be taken when activation retry failed the number of times specified in
Activation Retry Threshold and failover failed as many times as the number of times specified
in Failover Threshold when an activation error is detected.
Select a final action from the following:
• No Operation (Activate next resource)
• No Operation (Not activate next resource)
• Stop Group
• Stop cluster service
• Stop cluster service and shutdown OS
• Stop cluster service and reboot OS
• Generating of intentional Stop Error
For details on the final action, see “Final action.”
Execute Script before Final Action
Select whether script is run or not before executing final action when an activation failure is
detected.
• When selected:
A script/command is run before executing final action. To configure the script/command
setting, click Settings.
• When cleared:
Any script/command is not run.
Retry Count at Deactivation Failure (0 to 99) SuspendResume
Enter how many times to retry deactivation when an error in deactivation is detected.
If you set this to zero (0), deactivation will not be retried.
Final Action SuspendResume
Select the action to be taken when deactivation retry failed the number of times specified in
Retry Count at Deactivation Failure when an error in deactivation is detected.
Select the final action from the following:
• No Operation (Deactivate next resource)
• No Operation (Not deactivate next resource)
• Stop cluster service and shutdown OS
• Stop cluster service and reboot OS
• Generating of intentional Stop Error
For details on the final action, see “Final action.”
Note:
If you select No Operation as the final action when a deactivation error is detected, group does
not stop but remains in the deactivation error status. Make sure not to set No Operation in the
production environment.
ExpressCluster X 2.0 for Windows Reference Guide