ExpressCluster X 2.0 for Windows Reference Guide - Nec

NIC Link Up/Down monitor resource
Module
Type
Type
miiw Error 4
miiw Error 5
miiw Error 6
Return
Value
Section III Maintenance information
Detailed info of monitor resource errors
Message Description Solution
IP address does not
exist.
Failed to get IP address
table.
Failed to get NIC
interface name.
IP address does not
exist.
Failed to get IP address
table.
Failed to get NIC
interface name.
miiw Error 7 Failed to get NIC status. Failed to get NIC status.
miiw Error 8
miiw Error Others
ODBC monitor resource
Module
Type
Type
odbcw Error 1
odbcw Error 2
odbcw Error 10
odbcw Error 11
odbcw Error 12
Return
Value
Detected NIC Link
Down.
An internal error has
occurred.
Detected NIC Link
Down.
An internal error has
occurred.
Message Description Solution
Initialization has
failed[%1!s!].
The configured value is
not correct.
A function error was
detected.
An error was detected in
accessing the monitor
target.
An error was detected in
user authentication.
Initialization process has
failed. It may be due to
memory allocation
failure.
Information on the
initialization may be
displayed on %1.
The configured value of
the monitoring is not
correct.
A function error
occurred.
The access to the
database failed.
The access to the
database failed.
NIC may have been
disabled. Check if the IP
address of the specified
NIC exists by the
ipconfig command.
Memory or OS
resources may not be
sufficient. Check them.
Memory or OS
resources may not be
sufficient. Check them.
Check if the NIC device
is supported by the
device I/O controller.
Check if the LAN cable
is connected properly.
Memory or OS
resources may not be
sufficient. Check them.
OS itself may have
errors. Restart the
server or take other
actions.
Check the configured
value on the Builder
since it may not be
correct.
Monitor applications or
OS may have errors.
Check the status of the
system.
Check configured values
on the Builder (such as
a database name). If
there is no error, check
the database has errors.
Check configured values
on the Builder (such as
a user name or a
password). If there is no
error, check if the
843