ExpressCluster X 2.0 for Windows Reference Guide - Nec

Section II Resource details
Understanding SMTP monitor resources
POP3 monitor resources connect to the POP3 server and execute the command to verify the
operation. As a result of monitoring, the following is considered as an error:
(1) When connection to the SMTP server fails.
(2) When an error is notified as a response to the command.
Displaying and changing the SMTP monitor resource details
1. Click Monitors on the tree view displayed on the left side of the Builder window.
2. List of the monitor resources is displayed in the table view on the right side of the screen.
Right click the target SMTP monitor resource, and click the Parameter tab in the Monitor
Resource Property window.
3. On the Parameter tab, you can display and/or change the detailed settings by following the
description below.
IP Address SuspendResume
You must specify the IP address of the SMTP server to be monitored. Default value: 127.0.0.1
Port No. SuspendResume
Specify the port number of the SMTP to be monitored. You must specify this port number.
Default value: 25
User Name Within 255 bytes SuspendResume
Specify the user name to log on to SMTP. If no user name is specified, SMTP authentication is
not performed.
Default value: None
Password Within 255 bytes SuspendResume
691