ExpressCluster X 2.0 for Windows Reference Guide - Nec

Chapter 5 Compatible command reference
Moving or failing over a group (armfover command)
358
armfover.exe: the armfover.exe command moves or fails over a group
Command line:
armfover.exe [/F] group_name
Description This command moves or fails over a group.
A group is moved or failed over to a server other than the current one
that is operating normally and has the highest priority.
Parameter
Return Value
/F Fails over a group.
When this parameter is omitted, a group is moved.
When a group is failed over, “FAILOVER” is set to the
environment value of the start script “CLP_EVENT”
on the destination server.
When a group is moved, “START” is set to the
environment value of the start script “CLP_EVENT”
on the destination server.
group_name Specifies the name of the group to be moved or failed
over.
0 Success (the group was moved or failed over).
7 The specified group has not been started.
8 The ExpressCluster Server service has not been started.
9 The parameter is invalid.
Notes Do not run this command directly from the start or stop script. When
using this command from those scripts, prepare the batch file on which
the command is described, and then run the batch file on the start or stop
script by writing “START batch_file_name” on it.
Remarks This command can be specified both in and outside scripts. When
running this command on the start or stop script, follow the steps on
Notes.
ExpressCluster X 2.0 for Windows Reference Guide