ExpressCluster X 2.0 for Windows Reference Guide - Nec

Section I Detailed functions of ExpressCluster
Shutting down the whole cluster (armstdn command)
Shutting down the whole cluster (armstdn
command)
armstdn.exe: the armstdn.exe command shuts down the whole cluster.
Command line:
armstdn.exe [reboot | off | stop]
Description This command stops the ExpressCluster service in the whole cluster, and
shuts down all servers.
Parameter
Return Value
No parameter Powers off the server after shutdown.
reboot Reboots the server after shutdown.
This parameter cannot be specified with the off or stop
parameter.
off Powers off the server after shutdown.
This parameter cannot be specified with the reboot or
stop parameter.
stop Stops only the ExpressCluster Server service without
shutting down the server.
This parameter cannot be specified with the reboot or
off parameter.
0 Success
8 The ExpressCluster Server service is not running.
9 The parameter is invalid.
Notes Servers which cannot be communicated from the server on which this
command was run are not shut down.
Do not run this command while activating a group. Since a group cannot
be inactivated while being activated, an emergency shutdown is
executed.
Remarks This command can be specified only outside scripts.
371