This section is available on request - MAN Diesel & Turbo

MAN B&W 5.16
Components for Engine Control System
Installation of ECS in the Engine Control Room
The following items are to be installed in the ECR
(Engine Control Room):
• 2 pcs EICU (Engine Interface Control Unit)
( pcs only for ME-B engines)
• pcs MOP (Main Operating Panel)
Touch d<strong>is</strong>play, 5”
PC unit
• pcs Track ball for MOP
• pcs PMI system
D<strong>is</strong>play, 9”
PC unit
• pcs Back�up MOP
D<strong>is</strong>play, 5”
PC unit
Keyboard
• pcs Printer
• pcs Ethernet Hub
�������������
�������������
����������
������������
����������������
����� �����
������������ ���
����������
����������
�������
Page of 4
The EICU functions as an interface unit to ECR
related systems such as AMS (Alarm and Monitoring
System), RCS (Remote Control System) and
Safety System. On ME-B engines the EICU also
controls the HPS.
The MOP <strong>is</strong> the operator’s interface to the ECS.
From there the operator can control and see status
of the engine and the ECS. The MOP <strong>is</strong> a PC
with a flat touch screen.
The Back�up MOP cons<strong>is</strong>ts of a PC unit with
keyboard and d<strong>is</strong>play and serves as a back�up in
case the MOP should break down.
The PMI offline system <strong>is</strong> equipped with a standard
PC. The PMI system serves as a pressure
analyse system. See Section 8.02.
Optional items to be mounted in the ECR include
the CoCoS�EDS which can be purchased separately
and applied on the PC for the PMI offline
system. See Section 8.03.
����������
��������������������������������������������������
�������������
Fig. 5.16.01 Network and PC components for the ME/ME-B Engine Control System
178 57 50-3.0
MAN B&W ME/ME-C/ME-GI/ME�B engines 198 46 97�7.4
MAN Diesel