This section is available on request - MAN Diesel & Turbo

MAN B&W 19.06
L<strong>is</strong>t of Spare Parts, Unrestricted Service
Spare parts are requested by the following Classes
only: GL, KR, NK and RS, while just recommended by:
ABS, DNV and LR, but neither requested nor recommended
by: BV, CCS and RINA.
Cylinder cover, plate 901 and others
Cylinder cover with fuel, exhaust and starting
valves, indicator valve and sealing rings (d<strong>is</strong>assembled)
½ set Studs for cylinder cover
P<strong>is</strong>ton, plate 902
P<strong>is</strong>ton complete (with cooling pipe), p<strong>is</strong>ton rod,
p<strong>is</strong>ton rings and stuffing box, studs and nuts
set P<strong>is</strong>ton rings for cylinder
Cylinder liner, plate 903
Cylinder liner inclusive of sealing rings and
gaskets.
Cylinder lubricating oil system, plate 903 )
set Spares for lubricating oil system for cyl.
2 Lubricator backup cable
Connecting rod, and crosshead bearing, plate 904
Telescopic pipe with bushing for cylinder
Crankpin bearing shells in 2/2 with studs and nuts
Crosshead bearing shell lower part with studs
and nuts
2 Thrust pieces
Thrust block, plate 905
set Thrust pads for ‘ahead’
For NK also one set ‘astern’ if different from
‘ahead’
HPS � Hydraulic Power Supply, plate 906 and 2 )
Proportional valve for hydraulic pumps
Leak indicator
Safety coupling for hydraulic pump
Accumulator
6 Chain links. Only for ABS, LR and NK
set Flex pipes, one of each size
Electric motor
Engine control system, plate 906 2 )
Multi Purpose Controller
Amplifier for Auxiliary Control Unit
Position Amplifier
Trigger sensor for tacho system, only if
trigger ring
Marker sensor for tacho system
Tacho signal amplifier
ID�key
Fig. 19.06.01: L<strong>is</strong>t of spare parts, unrestricted service: 4 87 601
Encoder
Fuse kit
Starting valve, plate 907
Starting valve, complete
Solenoid valve 2 )
Page of
Hydraulic cylinder unit, plate 907 and 2 )
Fuel booster barrel, complete with plunger
FIVA valve complete
Suction valve complete
set Flex pipes, one of each size
High-pressure pipe kit
Packing kit
Exhaust valve, plate 908
2 Exhaust valves complete. only for GL
High�pressure pipe from actuator to exhaust valve
Exhaust valve position sensor
Fuel valve, plate 909
set Fuel valves for all cylinders on one engine for BV,
CCS, DNV, GL, KR, NK, RINA, RS and IACS
set Fuel valves for half the number of cylinders on
the engine for ABS
High�pressure pipe, from fuel oil pressure
booster to fuel valve
Turbocharger, plate 910
Set of maker’s standard spare parts
a) Spare rotor for one turbocharger, including
compressor wheel, rotor shaft with turbine
blades and partition wall, if any
Scavenge air blower, plate 910
set Rotor, rotor shaft, gear wheel or equivalent
working parts
set Bearings for electric motor
set Bearing for blower wheel
Belt, if applied
set Packing for blower wheel
Bedplate, plate 912
Main bearing shell in 2/2 of each size
set Studs and nuts for main bearing
) MD required spare parts.
2 ) All spare parts are requested by all Classes.
a) Only required for RS. To be ordered separately as
option: 4 87 660 for other classification societies.
Please note: Plate number refers to Instruction Book,
Vol. III containing plates with spare parts
MAN B&W ME/ME�C/ME�GI engines 198 64 16�2.3
MAN Diesel