Reference Manual - Videx, Inc.

4. Verify that the CyberAudit-Web server address is correct - The CyberAudit-Web server IP address is used bythe Web Authorizer to contact the CyberAudit-Web server. It must be provided to the Web Authorizer to enableit to function correctly within the CyberAudit-Web system. It may be entered in one of two ways:By default, the Web Authorizer is a DHCP client and does not require a proxy server to enable it toconnect to a web site. In this case, the server IP may be manually entered on the Web Authorizerkeyport.If the CyberAudit-Web server will be referred to by domain name instead of IP address or if a proxyserver is required to connect to the CyberAudit-Web service, enter the required information in thesupplied fields. In this case, the Web Authorizer network settings must be written to a USB flashmemory disk drive and carried to each Web Authorizer to load the settings.5. Save the settings and Configure the Web AuthorizerAdditional links:Web Authorizer DescriptionInstalling a Keyport (see Installing a Keyport.pdf)Audit Trail EventsWeb Authorizer Keyport MessagesWeb Authorizer 2-Key InputsResetting Web Authorizers