Reference Manual - Videx, Inc.

Removing KeysScan an RFID card or enter four or more digits on the keypad, followed by #. Thecabinet will beep and release the door latch. The keypad display will show a mapof the key locations inside the cabinet represented by the letter v. The letter orepresents an open socket, and the letter X represents the key which has beenreleased for removal.Open the door. The key indicated by the letter X will be flashing.Remove the key. The display will show KEY OUT.Close the door. The display will showREADY, then go black after 20 seconds.Number Code FunctionsEntering a 2-digit code on the keypad, followed by the # key, will cause the cabinet to performvarious functions which are a subset of those available in Normal Mode. These functions areas follows:11#: displays the serial number of the Vault 20 FX, minus the leading O.22#: causes the Vault 20 FX to contact its CyberAudit-Web server. If successful,it displays "ONLINE!". Otherwise, it displays an error message indicating thecause of the failure.33#: displays the date and time from the Vaults clock.44#: not used in demo mode55#: not used in demo mode66#: not used in demo mode77#: not used in demo mode88#: unlatches the Vault door. The display shows the key map.