Reference Manual - Videx, Inc.

Single CyberKey Vault Status Indicator Lights and TonesThe Single CyberKey Vault uses both status indicator lights and tones to indicate status anderror conditions.RFIDreaderlight incenter ofpanelPowerFlashes continuously when the Vault is powered. Off when there is no power or if the RFIDunit is not functioning.Steady on when the Vault is powered and ready to use. Off when there is no power.Charging Steady on when the Vault is charging a CyberKey battery. Otherwise off.ChargeCompleteSteady on when the Vault is holding a CyberKey Rechargeable and the key's battery is at fullcharge. Otherwise off.ReadyOff when the Vault has no connection to a computer or server.Steady on with a USB connection to any computer.Steady on when the Vault establishes network connection to CyberAudit-Web in thedatabase or account to which it was added.Flashing alternately with the Busy LED when CyberAudit-Web denies access to anRFID Access Card. This sequence is repeated seven times. Denied Vault access isalso accompanied with a single low-tone. And if a valid CyberKey is present,CyberAudit-Web ensures that the key is disabled and sounds the disable tones.Flashing when the CyberKey in the Vault has been programmed and is ready for use.When the flashing starts it is accompanied by a single low-high audio tone combinationand a release of the door latch.BusyOff when idleFlashing when the Vault is attempting to process the inserted CyberKey.Flashing alternately with the Ready LED when CyberAudit-Web denies access to anRFID Access Card.Flashing alternately with the Key Present LED during network communications whenCyberAudit-Web discovers the inserted CyberKey is invalid. This is accompanied witha continuous alternating high-low tone sequence.