Reference Manual - Videx, Inc.

Keyport Messages Generated by LAN AuthorizersModem Authorizer MessagesAuthorizers Messsages Generated by the ServerMessagePIN#WAITKEY NOT FOUNDHUBREADYREBOOT HUBREADYREADY *KEYREADYLOW BATTBAD PIN#WRONG PWKEY FAILCOMMFAILLINKUPHOSTHUB BUSYWAITKEYPADDISABLEDCLOCKSTOPKEYLOCKEDLOAD HUBFIRMWAREUPDATEBOOTLOADSEC CODEBAD CODEDescriptionKey record in the Authorizer requires a PIN before key will be enabled.The keyport is waiting for the Authorizer to respond.This key does not have a key record in the Authorizer and the Authorizer does nothave a designated host server to contact.The Authorizer successfully completed a power-on reset.The Authorizer is restarting after power-on.The Authorizer is ready but it is not connected to a network device. This would benormal for a remote modem connection.The Authorizer is ready and connected to a network device.The key has been programmed and is ready to use.The Authorizer has determined that this key has a low battery.The PIN input does not match the expected PIN for the key.The database identifier between the Authorizer and the key do not match.Keyport was unable to communicate with the key.No response from the CAW server when Authorizer attempted to contact it.The Authorizer is attempting to contact the CAW server. Typically this occurs to getinformation to program a key that is not in the Authorizer's key record database.This message is displayed when the server has instructed the Authorizer to erase oneof its databases; schedules, key records, holidays, etc.The server has temporarily disabled the keyport during an update. This temporarilyprevents a key from being processed.The Authorizer's clock has stopped, typically because of an extended power loss. Itwill continue to display this message when a key is inserted into the keyport until theserver updates the Authorizer's clock.The Authorizer has reached the number of times it will allow retrying a PIN.Displayed during the process of updating Authorizer firmware.Displayed during the process of updating Authorizer firmware.The Authorizer is prompting for a security code.The security code does not match the one the Authorizer is expecting.