Reference Manual - Videx, Inc.

Authorizer Modem MessagesTopMessageDIAL MODEMINIT MODEMHANGUPMODEMCONNECTRINGNO CARRIERMODEM ERRORNO DIAL TONEDescriptionAuthorizer is attempting to connect with another Authorizer.Authorizer is loading the modem from its stored configuration.Authorizer is terminating its modem connection.Authorizer has established a modem connection with another Authorizer.The Authorizer being called displays this message.Connection dropped by remote.Internal error. Possible hardware or configuration problem.No phone line detected when attempting to dial out.Keyport Messages Generated by CyberAudit-WebTopMessagePLS WAITCOMMFAILLOOKUPUNKNOWNKEYISSUE#ISSUE#ORMISSION#BAD ISSUE#JOB# ORLOGIN #BAD JOB#NEW LOCKLOGIN #CANT ADDNEW LOCKPIN#BAD PIN#DISABLEDCLEARINGDescriptionA short period of time is expected after removing a key to allow the processing of thekey's events from an Authorizer. The server will also display this message whileissuing or missioning a key, or gathering status information.This message will be displayed by the server if an exceptional error occurred while theserver programs a key.The server is determining if the key is known to the system and if it should be issued,missioned, and/or dynamically programmed.The server has not found the key ID in the database but has found the key's DB flag isset. This indicates that the key belongs to another database and is rejected by theserver.The server is prompting the user to input an issue number for this key.The server is prompting the user to input an issue number or a mission number forthis key.The server has determined that the number input does not match any numbers in thedatabase.The server is prompting the user to input a job number or an administrator's loginnumber for a Programmer or Grand Master.The server has determined that the number input does not match any JOB#s orLOGIN#s in the database.A Grand Master contains newly programmed lock records and requires a login # toadd them.The login number entered does not have permission to add new locks.If a PIN is required to program this key, the server will prompt with this message.The server has determined that the PIN input does not match the expected PIN for thekey.The server has determined that this key has an active mission or is a deleted key. Inboth cases, the server disables the key prior to re-issuing.The key is zeroing the audit trail events and preparing to accept a configuration.