Reference Manual - Videx, Inc.

878896Mission numbernot foundNo storedCyberKeyconfigurationfoundPIN inputmodule notavailableThe hub did not find a mission number matching theone entered at the keypad or data knob.A mission number was found but no correspondingCyberKey programming instructions were found.Access to a Vault requires entry of a PIN but no DataKnob, Keypad, or other device is available in the group.98 Vault opened The Weatherized Vault was opened.99 Vault latchedThe Weatherized Vault lid was returned to the closedposition that captures it in its latch.Mission numberenteredMission templatenameName of PersonName of VaultName of PersonName of VaultRequest detail:107Special actionrequestreceivedAn Input # or RFID card scan generated an Open Vaultrequest.Request toopen VaultRequest toopen Vault20 FX andunlocksocketRequest toremoveinvalid keyfrom a Vault20 FXRequest toopen Vaultto return key108109111112113114115Requestedmission alreadychecked outMission # notfoundKey RinginsertedModulefirmware updatefailedModulefirmware updatesuccessfulHub dataclearedSpecial keypadinputFlex System hubs will track missions checked out andwill not issue a second CyberKey for the same mission.CyberAudit-Web also updates all Flex hubs in thesystem when a mission is checked out from a Vault onanother hub.The Flex hub did not find the mission number entered inits list of cached missions.A Key Ring CyberKey has been identifiedThe hub received a command to clear one or more ofits stored records or data.Three or fewer digits were entered and submitted froma data knob or keypad/display.Name of missionName of personMission # enteredKey IDA list of the datatypes clearedInput received