Reference Manual - Videx, Inc.

LAN Authorizer Audit Trail Events# Message Description Keyport # Data16171819key ID notfound inAuthorizerkey ID found inAuthorizerkey removedfrom keypadkeydownloaded20 key configured21PIN ok - key isready22 bad PIN232425264849505152communicationswith key failedsystemidentifier did notmatchtoo many PINtries: keydisabledno responsefrom host forunknown keyno modempresent or failedto initializemodemmodem failed toconnect tophone numberperiodicEthernetconnectioncheck failedconnected tophone numbermodem ringindicatorreceivedNo key record for key in the Authorizer'skey database. UPLINK HOST is displayedat the keyport.Key record for key ID found in theAuthorizer's key database.Key data was downloaded and is stored inthe Authorizer.Key has been updated from theAuthorizer's databases but has not yetbeen enabled.If a PIN was required, it was correctlyentered. The key has been enabled and isready to use - KEYREADY is displayed atthe keyport.A PIN was required. One was entered but itdidn't match the required PIN for the key.Broken or intermittent connection to the keyor communication was interrupted.COMMFAIL is displayed at the keyport.The database identifier programmed intothe key does not match the one used bythe Authorizer - WRONG PW is displayedat the keyport.1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 1 or 2 (not implemented) 1 or 2 The Authorizer attempts to contact the hostIP for up to 30 seconds. The keyportdisplays UPLINK HOST. If it does notreceive a response, it displays COMMFAIL.This could occur if there is NO DIALTONE,BUSY, NO ANSWER.Authorizers set up for use on a networksend out an ARP every 45 seconds to fetchthe MAC address of the CyberAudit-Webserver. If there is no response for 1 hour,this event is recorded.Dial out successful - connected to hostmodem. Keyport displays CONNECT.1 or 2 noneKeyport displays RING. (none)