Reference Manual - Videx, Inc.

Open Vault - There may be occasions where the Vault 20 FX may need to be opened tointroduce CyberKeys or to remove one that does not belong to that Vault. In thesecircumstances the Vault may be opened either by a specific RFID access card, a specificinput number, or both. Using this method, the Vault 20 FX does not program a CyberKey sowhen the key is removed it has no access permissions. For the Vault 20 FX this input willopen the door and open one the key retainer in the upper left of the cabinet. If there is aCyberKey present in that retainer it may be removed. Each subsequent scan or keypad inputwill open the next retainer moving from left to right. To remove an invalid CyberKey, enter 88#after the door is open. To add a key just insert one into any available key retainer.Click the Scan card button to use any card reader in the system to capture the ID from anRFID card. CyberAudit-Web will automatically capture the ID and save it if the card is notalready issued to someone in the system.