Reference Manual - Videx, Inc.

6. If adding a USB Station, skip thisstep. After entering and saving thenetwork settings, the Web Stationmust be configured using the USBcable and the CyberLink software.Note: Web Stations have twoseparate modes ofcommunications, USB andEthernet. When no power isconnected from the 12Vtransformer, the Web Station is inUSB mode. Applying powerthrough the power jack toggles it toEthernet mode. The web stationmust be configured in the next stepin USB mode (USB cableconnected, no power connected).7. Plug the Station in via the USBcable and click the "LaunchCyberLink" link.8. If the Station was created using anissue number, enter that number.9. After CyberLink updates the stationand its change icon ( ) clears,the Station will be ready tocommunicate with keys. A WebStation may be disconnected fromUSB and connected to its powercable and Ethernet cable. When itmakes contact withCyberAudit-Web, its green 'Ready'light will glow on the station andthe green OK ( ) will appear inthe stations list page.