Reference Manual - Videx, Inc.

Using CyberLink as an RFID Card ReaderCyberLink can be used with a CyberKey Vault or a CyberAudit RFID Reader to capture the IDof 13.56MHz RFID access cards. Once captured, it will paste the ID at the cursor location onthe local computer. This is most useful when entering RFID access card IDs into CyberAuditas it verifies the ID stored will match the ID read by the Vault.To enable CyberLink to capture ID scans from a CyberKey Vault, launch CyberLink and dropdown the Options menu. If it is not already "checked", select the Card Scanner menu item toenable it. CyberLink automatically enables the card reader function when it detects aCyberAudit RFID reader.