Reference Manual - Videx, Inc.

UNKNOWNCARDLINKUPHOSTUNKNOWNMISSIONACCESSEXPIREDACCESSOUT OFSCHEDULENOACCESSRETURNKEYKEY INCLOSEVAULTINVALIDKEYREMOVEINVALIDKEYKEY INDISABLEKEYKEY OUTCLOSEVAULTKEY OUTNO KEYSETTINGMISSIONALREADYOUTNOMISSIONASSIGNEDPROGRAMKEYDOWNLOADKEYISSUE"orMISSION"UNKNOWNISSUE"MISSION"KEY COMMFAILThe scanned RFID access card was not recognized.The Flex System hub did not recognize the scanned RFID card, entered mission #, orinserted CyberKey and is attempting to contact CyberAudit-Web for resolution. If it isThe mission entered using the Data Knob or Keypad Display was not recognized.The schedule paired with the Vault(s) has expired for the person attempting access orthe mission is past its Final End Date.Access was attempted to the Vault(s) outside the time frames of the scheduledaccess for the person.The person assigned to the RFID access card or mission # does not have permissionto use the Vault.Instuction to return a CyberKey to a Vault from a mission.Once the Flex System hub determines that the key inserted into the WeatherizedVault is valid it displays this message.An invalid key was inserted into a Weatherized Vault or Vault 20 FX. CyberAudit-Webevaluates the key ID. If that ID is eligible to assign to the Flex Hub, it will do soautomatically and update the hub at the next opportunity.A CyberKey in the current Vault is not valid. If it is in a Weatherized Vault, it must beremoved from the Vault to resume normal operations.A CyberKey was inserted into a Vault 20 FX or Keyport.CyberAudit-Web sent a configuration to the CyberKey to disable all accesspriviledges.A CyberKey was removed from a Weatherized Vault.A CyberKey was removed from a Vault 20 FX or a Keyport.A mission number was found but no corresponding CyberKey programminginstructions were found.The requested mission has already been checked out from another communicatorand may not be checked out again until that mission has been checked in.No mission is assigned to the scanned RFID access card.Displays when the Flex System hub is loading a CyberKey with a mission or disablingit after returning it to a Vault.Displays when the Flex System hub is downloading the audit trail records from aCyberKey.The CyberKey inserted into the KeyPort may be issued to a person or used with amission . The user may enter the unique number followed by '"'.The number entered was not recognized by CyberAudit-Web as either a valid Issuenumber or Mission.Indicates the Flex Hub was not able to maintain good communications with aCyberKey. Typically this occurs because of contamination on the key contacts on theVault and/or the key tips. ( CyberKey Cleaning Instructions)