Reference Manual - Videx, Inc.

KEYADDITIONDENIEDThe key in the KeyPort cannot be used because the Key is the wrong type or themission is no longer valid.MessageNOVAULTNO VALIDKEYNOTVAULT20 FXIHS DOORCLOSEIHS DOOROPENSTARTIHSCANCELIHSBAD KEYSETTINGRTC STOPMEMORYFULLBOOTLOADFLEX HUBBOOTLOADMODULEBOOTLOADFAILBYPASSMODEDescriptionSystem Messages and ErrorsThe group is configured to use a Vault but no physical connection to a Vault is found.The person has permission to check a CyberKey out from a Vault but the Vault doesnot have a valid CyberKey available to issue.A special key input was entered applicable only to a Vault 20 FX.The Flex Hub received a signal to lock the Door.The Flex Hub received a signal to unlock the DoorThe hub is responding to an Inter-hub signal.The hub received a command to stop responding to an Inter-hub signal.Occurs if a cached record in the Flex System hub for a mission is corrupt.The Flex System hub clock stopped. No access will be granted to either a Vault or aDoor.The Flex System hub memory is full. No additional activity is allowed until it canconnect and upload to CyberAudit-Web.The Flex System hub is updating its firmware from CyberAudit-Web.The Flex System hub is updating the firmware of one of its modules.A firmware update process failed.The Flex System hub needs to contact CyberAudit-Web about an unknown key in itsKeyport but the permission to contact has been disabled.