Reference Manual - Videx, Inc.

READINGWRITINGKEYREADYINSERT KEYLOW BATTNOREADINGDB FLAGERROROLD KEYREMOVEKEYDISABLEDCAN NOTPROGRAMThe server will display this message while gathering information for programming thiskey.This message is displayed while the key's new configuration is being written to it.The key has been configured and is ready to use.The server will prompt with this message in response to a 2 digit input requesting anID(55#) or battery voltage check(66#).The server has determined that this key has a low battery.The server can not read the battery voltage of this key.The server was unable to check the database flag for this key.The server has determined that this key has firmware too old to be used byCyberAudit-Web.The server has determined that this key was designated as lost and is now disabled.The server has determined that this key can not be programmed for one of severalreasons.The person may not have permission to add keys.If the key currently has an active mission, it would need to be completed firstbefore reissuing.This key may not have the required firmware to support configuring locks,downloading locks, or multiple access.HUB BUSYDOWNLOADDATABUSYUPDATINGREADY #The server is busy gathering status information from an Authorizer.The server is downloading and processing events from an Authorizer, including datadownloaded from CyberKeys.The server is writing instructions to an Authorizer.Indicates the server has completed its current job and is ready for new input oranother key.