Reference Manual - Videx, Inc.

View/Edit Flex Hub ModulesView the individual modules attached to a Flex System Hub by clicking a record in the FlexSystem Hub List and selecting Modules.This page contains the list of modules either currently attached or expected to be attached tothe selected Flex System Hub.Table Fields:Port - The number on the RJ-45 port on the Flex System Hub Module Panel. These arenumbered 1-8.Present - If the system has talked to the Vault in the last minute, a icon will be shown. Ifthe type of module for the port does not match the type of module originally added orplanned for the port, a conflict icon, appears.Grade - A green check ( ) indicates the modules are set up in a workable arrangement.All other icons indicate a problem or ambiguity. See the Grade Column section of Adding aFlex System Hub and Modules for more information about the Grade icons.Group - Identifies the set of modules that work together.Display Link - Identifies the Display module and the input devices that work together. Formore information see the Groups and Display Links section of Adding a Flex System Huband Modules.Serial# - The Serial Number ID of the module, if known or the last known attached module.A blank cell indicates the module has not been connected to the port.Module Type - None, Weatherized Vault, Display, Knob, RFID Reader, Keyport, Vault 20FX Key Controller, Vault 20 FX Powerboard.Firmware - Each module has a processor that executes firmware. This column shows thelast reported firmware version of the module.